|
|
|
Group 7: Precipitation, Evaporation, Level
|
|
40xxx
|
|
|
|
|
ProduktName
|
Zoom | Water Level Pressure Sensor
The sensor type 7510 is designed to measure water level of lakes, rivers, reservoirs etc., as well as ground water level. The probe is normally installed in a tube, ≥ 2”. The included clamping bracket, attached to the suspension cable, serves for adjustment of the measuring depth. The water level is measured by means of a ceramic differential pressure sensor, comparing the actual water pressure with the ambient air pressure. For this purpose the ambient air is linked to the sensor by means of a hose placed in the core of the suspension cable.
7510.1000
|
Water level sensor, class 0.25 %
|
7510.2000
|
Water level sensor, class 0.1 %
|
Meas. ranges:
|
0...1 m to 0...250 m (specify with order)) |
Accuracy:
|
0,25 % FS
(type 7510.1000) resp.
0.10 % FS
(type 7510.2000)
|
Output:
|
4...20 mA, 2 line
|
Power supply:
|
24 V DC
|
Housing:
|
Stainless steel, 1.4571
|
| Sensor: |
CERTEC Ceramic
|
Suspension cable:
|
PE, 12 m length (Standard);
other lengths up to 200m upon request
|
Clamping bracket:
|
Stainless steel, 1.4305, max. ∅ 52 mm
|
| Dimensions: |
∅ 32 x 181 mm length.
|
Weight:
|
approx. 1.50 kg
|
Calibration device, cable connection box and further accessories:
upon request
|
Zoom | Type-No.: 7520.0000
Water Level Radar Sensor
with horn antenna, for indirect measurement of water level of lakes, rivers, reservoirs etc. by determination of the distance between water level and a fixed sensor position above (e.g. at a bridge), using the principle of Radar reflection from the water surface. Continuous measurement by means of 26 GHz technology.
Meas. range:
|
0.05...15 m (distance through air)
other ranges upon request
|
Resolution:
|
max. 1 mm
|
Accuracy:
|
± 3 mm within 0.5...15 m under reference conditions by IEC 60770-1
|
Output:
|
4...20 mA, 2 line
|
Meas. interval:
|
approx. 1 s
|
Power supply:
|
24 V DC
|
Housing:
|
PBT (Polyester),
other materials upon request
|
Antenna:
|
18°; ∅ 48 mm; stainless steel, 1.4435
|
Fastening:
|
G 1 1⁄2“ thread
|
Dimensions:
|
Length: 292 mm, max. width: 107 mm
|
Weight:
|
approx. 2.50 kg
|
Display module and calibration accessories upon request
|
Zoom | Type-No.: 7530.0000
Water Level Sensor with built-in Datalogger
consisting of a pressure sensor, similar to type 7510, with integrated datalogger and a Li – battery built-in a special plastic probe housing. An additional built-in NTC – temperature sensor enables continuous measurement and storage of water temperature data.
The probe is normally installed in a tube, = 2”. The included clamping bracket, attached to the suspension cable, serves for adjustment of the measuring depth. The suspension cable also features to link the ambient air to the sensor by means of a hose placed in the core of the cable. A readout software is included.
Meas. range:
|
Water level: 10 m resp. 20 m (specify with order)
Water temperature: –5...+45°C
|
Accuracy:
|
Water level: 0.10 % FS
Water temperature: ± 0.1 K
|
Data acquisition:
|
Datalogger with memory for 10 000 meas. values
(circulate memory), real time clock, serial interface RS232
|
Power supply:
|
Li – battery; life time depending on scan rate,
e.g. with 1h – scan rate, approx. 10 years |
| Dimensions: |
∅ 46 x 350 mm (housing)
|
Weight:
|
approx. 1.20 kg
|
Cable length:
|
10 m;
other lengths on request
|
|
|
techn. Daten
|
| |
|
