|
|
|
Group 4: Wind
|
|
40xxx
|
|
|
|
|
ProduktName
|
Zoom | Combined Sensor for Wind Speed and Wind Direction
combination from types 4021 resp. 4034 (wind speed) and 4121 resp. 4122 (wind direction). Frame and socket made of black anodised aluminium. Further technical data corresponding with the single sensors
4400.0000
|
Combination from WS Sensor 4034.0000 and
WD Sensor 4122.0000
|
4400.1000
|
Combination from WS Sensor 4034.1000 and
WD Sensor 4122.1000
|
4400.2000
|
Combination from WS Sensor 4021.0000 and
WD Sensor 4121.0000
|
4400.3000
|
Combination from WS Sensor 4021.1000 and
WD Sensor 4121.1000
|
Max. load:
|
60 m/s
|
Dimensions:
|
Height approx. 825 mm, turning radius of wind vane: approx. 350mm
|
Heating (optional):
|
12 V, 2 x 6 W, controlled by thermostat
|
Connection:
|
IP 67 connector
|
Fastening:
|
Socket with ∅ 48mm hole
|
Operation temp.:
|
-35...+80°C
|
|
Zoom | Combined Sensor for Wind Speed and Wind Direction
combination from types 4035 (wind speed) and 4123 (wind direction). Frame and socket made of black anodised aluminium. Further technical data corresponding with the single sensors.
4500.0000
|
Combination from WS Sensor 4035.0000 and
WD Sensor 4123.0000
|
4500.0100
|
Combination from WS Sensor 4035.0100 and
WD Sensor 4123.0100
|
4500.1000
|
Combination from WS Sensor 4035.1000 and
WD Sensor 4123.1000
|
4500.1100
|
Combination from WS Sensor 4035.1100 and
WD Sensor 4121.1100
|
Max. load:
|
100 m/s
|
Dimensions:
|
height approx. 775 mm , turning radius of the wind vane: approx. 350 mm
|
Heating:
|
12 V, 2 x 6 W controlled by thermostat;
high performance heating 24 V/60 W
|
Connection:
|
metal connector, IP 67
|
Fastening:
|
Socket with∅ 48 mm hole
|
Operating temp.:
|
-25...+80°C,
with high performance heating –40...+80°C
|
|
Zoom | Type-No.: 4651.0000
Hand Cup Anemometer
hand held instrument, for manual measurement of wind speed. Black ABS housing, 4 different large scales.
Meas. range:
|
0...35 m/s
0...70 kn
0...120 km/h
0...12 Bft.
|
|
Zoom | Indication Instrument for Wind Speed
moving coil instrument in metal housing suitable for control panel installation; analog scale m/s and kn; illuminable.
4710.1000
|
size 96 x 96 mm
1 mA
|
4710.1100
|
size 96 x 96 mm
20 mA
|
4710.2000
|
size 144 x 144 mm
1mA
|
4710.2100
|
size 144 x 144 mm
20 mA
|
Meas. range:
|
0...41 m/s (inner scale)
0...80 kn (outer scale)
|
Division:
|
1 m/s resp. 2 kn
|
Meas. element:
|
I = 1 mA, Ri = 1 kΩ, resp. 20 mA
|
Scale:
|
240° analog
|
Dimensions:
|
See ordering code
|
Weight:
|
Dep. upon version max. approx. 1.3 kg
|
|
Zoom | Type-No.: 4720.0000
Indication Instrument for Wind Direction
three-coil receiver, instrument in metal housing, suitable for control panel installation, illuminable.
4720.1000
|
size 96 x 96 mm
|
4720.2000
|
size 144 x 144 mm
|
4720.2001
|
meas. range 0...360°
|
4720.2002
|
meas. range 2 x 180°
|
Meas. range:
|
0...360° resp.
180° P and 180° Stb
|
Division:
|
10°; N, NE, E, SE, S, SW, W, NW
|
Dimensions:
|
See ordering code
|
Weight:
|
Dep. upon version max. approx. 1.2 kg
|
|
Zoom | Type-No.: 4733.0000
Combined Indication Instrument
for simultaneous indication of wind direction (analog) and wind speed (digital) in metal housing for panel installation Selection m/s – kn is possible.
4733.1000
|
as above, with ext. panel with selection switch m/s-kn and dimmer
|
4733.1001
|
meas. Range WD 180° P and 180° Stb
|
Meas. range WD:
|
0...360° resp. 180° P and 180° Stb, division 10°
|
Meas. range WS:
|
0...41 m/s = 0...80 kn
LED display, 31⁄2 -digit
7-segment, height. 13.5 mm
|
Illumination:
|
2 x 12 V, 1 W
|
Dimensions:
|
144 x 144 mm, depth 125 mm
|
Weight:
|
approx. 1.4 kg
|
Power supply:
|
230 VAC / 50 Hz
|
Output:
|
12 V DC, 1.5 VA for supply of wind direction sensor;
12 V DC, 12 VA for heating supply WS
|
and WD;
|
or Type 4733.1--- additional output for ext. selection switch and dimmer
|
Signal input:
|
0...1 mA resp. 0...20 mA for WS; 3 phase signal (selsyn motor system) for WD
|
All Sensors of this group can be directly connected to Datenlogger COMBILOG (refer to product group 1). For display of wind parameters on a PC or screen various software programs are available (refer to product group 1: COMGRAPH, COMVIEW, COMAVIA).
Masts, crossarms and further accessories: Refer to product group 9
|
|
techn. Daten
|
| |
|
